If your door has fallen out of alignment, take time to make certain your door fits straight before you begin weatherproofing. If you plan to attach a new door bottom with a drip edge, you may have to plane the bottom of the door slightly. You’ll want to make certain the strike plate and latches are in alignment.
Adjust the Door
Reset and shim hinges to even out the gaps around the door, making the door easier to weather strip. Adjust strike plates and latches to keep doors snug in their frames.
Cut Metal Tension Strips To Fit Door Jamb
- Tack the strips in place and open them slightly to create a tight seal. If using V-Seal weather strip, cut them with scissors and fold them lengthwise along the seam. Remove the adhesive backing and stick the weather stripping in place.
- You can create a double seal by putting tube baskets with metal backing on the outside of the door. Cut them to length with tin snips, and screw or tack them in place so that they are snug against the door.
Option A: Screw a Bristle Sweep to the Bottom of the Door
Sweeps help keep air from leaking under the door, and you can attach one without trimming the door. Sweeps also are available on rollers to compensate for an uneven floor.
Option B: Attach a New Door Bottom with an Integral Sweep
Place an integral sweep drip edge on the outside. This may require you to adjust your threshold height or plane the bottom of the door slightly.
Option B: After Attaching a New Door Bottom, Seal the Wood
If you plane the door, seal the wood by painting it before you attach the sweep.
Ready to find the supplies you need in your local store? Use The Home Depot app to locate products and check inventory. We’ll take you to the exact aisle and bay.
